Polyurethane injection grouts and foams · 25 grades
PuTeRA
Water stopping, void filling, ground reinforcement, slab and track lifting.
- PuTeRA 2410: hydrophobic water-stopping polyurethane
- PuTeRA 2455 V5, V6 and V7: hydrophilic flexible polyurethane
- PuTeRA 2421: non-foaming polyurea silicate injection resin
- PuTeRA 2430 VG: rapid-set rigid foam for gushing water
- PuTeRA 2601 G: low-foam resin for pre-excavation ground reinforcement
- PuTeRA 2405 SJ: high-strength slab jacking polyurethane
- PuTeRA Level Up and 2406 HS: slab and ballastless track re-levelling
PuTeRA on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
Water-reactive two-component polyurethane resin
DrucHyd 2C
Curtain grouting against active inflow; waterproofing and consolidation under water pressure.
- Reacts with water and expands into joints and voids
- Used on our tunnel water ingress jobs from Katra to Mumbai
DrucHyd 2C on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
Polyurethane silicate injection resins · 5 grades
DrucPietra
Low-foaming resin for deep curtain grouting and rock consolidation.
- Penetrates fine fissures
- Consolidates fractured rock
DrucPietra on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
High-strength injection resins · 2 grades
DrucStone
Structural anchoring and consolidation.
- Anchoring of bolts and bars
- Consolidation where strength matters most
DrucStone on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
Acrylate permeation gels · 2 grades, plus Acrylic DH509RAcR
Teracryl
Fine soils, and wet, fine cracks.
- Teracryl 2420: magnesium acrylate permeation gel
- Acrylic DH509RAcR: rubber acrylate gel
Teracryl on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
Epoxy injection resin
Geo-EP 2422
Bonding structural cracks in concrete.
- Injected through packers into dry structural cracks
Geo-EP 2422 on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
Microfine cement
GeoFine
Rock and soil injection where a cementitious grout is specified.
GeoFine on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
TBM tail-skin sealants · 2 grades
TeraSeal
A continuous seal at the tail of shielded tunnel boring machines.
- TeraSeal 2406
- TeraSeal 2409
TeraSeal on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
Polyurethane membranes and polyurea · 6 grades
GeoShield
Waterproofing and protective linings.
- GeoShield 1K PU-M and 2K PU-M: polyurethane membranes
- GeoShield HPU 101-P: spray-applied hybrid polyurea
- GeoShield PPU 102-P: pure polyurea protective coating
- GeoShield FGP 103-P: polyurea lining for water tanks
GeoShield on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)
Epoxy primers and underlays; topcoats
Stroxi and Geothane
Primers under membranes; topcoats for sun, wear and chemicals.
- Stroxi: epoxy primers and underlays
- Geothane: topcoats
Stroxi and Geothane on aqueonglobal.com↗ (aqueonglobal.com, opens in a new tab)